* some notes on nycmesh

* <2023-11-09 Thu>
configuring omnitik routerOS

the default screen when i navigate to http://192.168.88.1/ it then
re-routes me to
http://192.168.88.1/webfig/#System:Reset_Configuration.Default_Configuration

which shows the following page in the "Quick Set" menu:

RouterOS v6.48.7 (long-term)

The following default configuration has been installed on your router:

Welcome to RouterOS!
   1) Set a strong router password in the System > Users menu
   2) Upgrade the software in the System > Packages menu
   3) Enable firewall on untrusted networks
   4) Set your country name to observe wireless regulations
-----------------------------------------------------------------------------
RouterMode:
 * WAN port is protected by firewall and enabled DHCP client
 * Wireless and Ethernet interfaces (except WAN port/s)
   are part of LAN bridge
LAN Configuration:
    IP address 192.168.88.1/24 is set on bridge (LAN port)
    DHCP Server: enabled;
    DNS: enabled;
wlan1 Configuration:
    mode:                ap-bridge;
    band:                5ghz-a/n/ac;
    tx-chains:           0;1;
    rx-chains:           0;1;
    installation:        outdoor;
    wpa2:      no;
    ht-extension:        20/40/80mhz-XXXX;
WAN (gateway) Configuration:
    gateway:  ether1 ;
    ip4 firewall:  enabled;
    NAT:   enabled;
    DHCP Client: enabled;